10/19/2024
Level of difficulty
MATERIALS
1 Amigurumi skein – Colors: #4445 (Tangerine), #8990 (Black), #7650 (Almond), #4131 (Dark-Cheddar) and #8001 (White);
1 Amigurumi Sparkle skein – Color: #8121 (Snowflake);
Crochet hook – 2,0 mm;
Safety eyes (10 mm) – Black;
1 pendant for belt (optional);
1 pair of acrylic doll sole 1.2” x 0.8”;
1 chopstick (hashi);
7.8” galvanized wire;
12” of white lace, 0.4” thick;
Crepe tape;
Tapestry needle;
Doll needle;Polyester stuffing;Locking stitch marker;
Craft glue.
Stitch Glossary and Abbreviations:
Increase = inc.; Triple Increase = incT.; Chain = ch., Decrease = dec.; Half Double Crochet = hdc.; Slip Stitch = sl st.; Single Crochet = sc.; End of Row/Round = eor; Place Marker = pm.; BLO = back loops only; FLO = front loops only.
Approximate size: 9.05”
Execution:
Head
With Amigurumi yarn color #3061 (Gardenia) and 2.0mm crochet hook
Head
With Amigurumi yarn color #7650 (Almond)
1 - 6 sc. inside of a magic ring;
2 - 6 inc. = 12 sc. Note: pm. on first sc.;
3 - 1 sc., 1 inc. to eor = 18 sc.;
4 - 2 sc., 1 inc. to eor = 24 sc.;
5 - 3 sc., 1 inc. to eor = 30 sc.;
6 - 4 sc., 1 inc. to eor = 36 sc.;
7 - 5 sc., 1 inc. to eor = 42 sc.;
8 - 6 sc., 1 inc. to eor = 48 sc.;
9 to 18 (10 rounds) - 48 sc.
Place the safety eyes between rounds 15 and 16, with 5 visible stitches between them after they are placed.
19 - 6 sc.,1 dec. to eor = 42 sc.;
20 - 5 sc., 1 dec. to eor = 36 sc.;
21 - 4 sc., 1 dec. to eor = 30 sc.;
22 - 3 sc., 1 dec. to eor = 24 sc.;
23 - 2 sc., 1 dec. to eor = 18 sc.;
24 - 1 sc., 1 dec. to eor = 12 sc.;
25 - BLO: 12 sc.;
26 & 27 - 12 sc.
Stuff it.
Fasten off and weave in the yarn tail inside the head.
Embroider the nose using Amigurumi yarn color #7650 (Almond) over the 3 central stitches, just below the eyes, on the 17th rnd. Embroider the eyelashes and eyeliner using Amigurumi yarn color #8990 (Black), the eyes with Amigurumi yarn color #8001 (White), the eyeshadow with Amigurumi yarn color #4131 (Dark Cheddar), and the eyelid with Amigurumi yarn color #7650 (Almond).
Legs (2) and Body
Start with Amigurumi yarn color #4131 (Dark-Cheddar)
Go up 6 ch., skip the 1st one.
1 - 4 sc., 1 incT. in the last ch, on the other side of the foundation chain: 3 sc., 2 inc. = 14 sc.;
2 - 4 sc., 3 inc., 4 sc., 3 inc. = 20 sc.;
3 - 20 sc.;
4 - BLO: 20 sc.;
Glue the acrylic sole to the inside of the foot with Craft Glue.
5 & 6 - 20 sc.;
7 - 5 sc., 4 dec., 7 sc. = 16 sc.;
8 - 3 sc., 4 dec., 5 sc. = 12 sc.;
9 & 10 - 12 sc.;
11- FLO: 12 pb.
Change to Amigurumi yarn color #7650 (Almond)
12 - BLO: 12 sc. (in the loops of round 10);
13 to 16 (4 rounds) - 12 sc.
Fasten off the first leg. Make the second leg and don't cut the yarn. In the next round, join the legs. Make 3 ch. in the second leg.
17 - Attach with 1 sc. in the first leg, make more 11 sc. in the first leg, 3 sc. in the ch., 12 sc. in the second leg, 3 sc. on the other side of the ch. = 30 sc.
Stuff the legs.
18 & 19 - 30 sc.
Change to Amigurumi yarn color #8990 (Black)
20 - 30 sc.;
21 & 22 - BLO: 30 sc.;
23 - 3 sc., 1 dec. to eor = 24 sc.;
24 & 25 - 24 sc.;
26 - 2 sc., 1 dec. to eor = 18 sc.;
27 - 18 sc.;
28 - 1 sc., 1dec. to eor = 12 sc.;
29 to 39 (11 rounds) - 12 sc.;
40 - 6 dec. = 6 sc.;
Do not cut the yarn, make the skirts first.
1st skirt of the dress
With Amigurumi yarn color #4445 (Tangerine)
In the loops left over from round 20 of the body.
1 - 30 inc. = 60 sc.;
2 to 6 (5 rounds) - 60 sc.
Fasten off.
2nd skirt of the dress
With Amigurumi yarn color #8990 (Black)
In the loops left over from round 21 of the body.
At the front of the body, find the center, mark the stitch and start there, working back-and-forth rows.
1 - 29 inc. = 58 sc. (TURN);
2 - 58 sc. (TURN);
3 - Skip the 1st stitch, 57 sc. (TURN);
4 - Skip the 1st stitch, 56 sc. (TURN);
5 - Skip the 1st stitch, 55 sc.
Fasten off.
Break a chopstick in half, put the pieces together, and wrap the crepe tape around them several times. Center it inside the body and stuff it, filling the entire body.Note: If the chopstick is longer than the body, trim the excess before wrapping it with tape.Fasten off the body with a reverse magic ring.
Head JointAfter finishing the body, you can now attach and articulate the head.Joint: To attach the head to the body, you will use the joint technique. For this, cut a 12” piece of yarn in color #7650 (Almond) and, using a doll needle, pass the yarn through the neck between the 30th and 31st rounds, then pass it through the head, exiting at the top. Repeat the same process with the other end of the yarn. Then, tie the ends that come out of the top of the head, making a few knots to secure them firmly. Cut off the remaining yarn. Note: There is no need to hide the yarn, as the hair will cover it.
Shoes (2)
With Amigurumi yarn color #8990 (Black)
Make 7 ch., skip the 1st one.
1 - 5 sc., 1 inT. in the last ch., on the other side of the foundation ch.: 4 sc., 2 inc. = 16 sc.;
2 - 5 sc., 4 inc., 4 sc., 3 inc. = 23 sc.;
3 - 6 sc., 5 inc., 6 sc., 6 inc. = 34 sc.;
4 - BLO: 34 sc.;
5 & 6 - 34 sc.;
7 - 5 sc., 9 dec., 13 sc. = 25 sc.
Fasten off.
Put the shoes on the doll's feet.To make the bow on the shoe, cut 7.8” cm of Amigurumi yarn color #8990 (Black). Find the side stitches of the shoe, which are close to the beginning of the leg, and with a tapestry needle, thread the yarn from one side to the other, going through one stitch on each side. Then, tie a bow to finish.
Arms (2)
With Amigurumi yarn color #7650 (Almond)
1 - 4 sc. inside of a magic ring;
2 - 4 inc. = 8 sc. Note: pm. on first sc.;
3 & 4 - 8 sc.
Change to Amigurumi yarn color #8990 (Black)
5 - BLO: 8 sc.;
6 to 10 (5 rounds) - 8 sc.
Fasten off with a reverse magic ring.
Ruffle on the dress sleeve
With Amigurumi yarn color #4131 (Dark-Cheddar)
Attach the yarn to the loop left over from round 4 of the sleeve and make:
1 - 8 sl st.;
2 - 1 sc., 1 inc. to eor = 12 sc.
Fasten off.
Sew the arms to the side of the body, approximately at the height of the 27th and 28th rounds.
Ruffle (collar) of the dressSew the white lace, approximately 4”, around the neck by hand, crimping it tightly.Cut a piece of Amigurumi yarn color #4445 (Tangerine) and tie a bow around the neck, over the lace collar.Cut approximately 12” of Amigurumi yarn color #4445 (Tangerine) and wrap it twice around the doll's waist. If you like, add a pendant of your choice and tie a bow.
Hair
With Amigurumi Sparkle yarn color #8121 (Snowflake)
1 - 6 sc. inside of a magic ring;
2 - 6 inc. = 12 sc. Note: pm. on first sc.;
3 - 1 sc., 1 inc. to eor = 18 sc.;
4 - 2 sc., 1 inc. to eor = 24 sc.;
5 - 3 sc., 1 inc. to eor = 30 sc.;
6 - 4 sc., 1 inc. to eor = 36 sc.;
In the 6th round, make 36 strands, repeating: (30 ch., going back with 1 hdc. over each ch. loop).Once done, fit the wig to the head and glue it on.
Hat
With Amigurumi yarn color #4445 (Tangerine)
1 - 6 sc. inside of a magic ring;
2 - 6 sc. Note: pm. on first sc.;
3 to 8 (6 rounds) - 6 sc.;
9 - 1 sc.,1 inc. to eor = 9 sc.;
10 - 9 sc.;
11 - 2 sc., 1 inc. to eor = 12 sc.;
12 - 12 sc.;
13 - 3 sc.,1 inc. to eor = 15 sc.;
14 - 15 sc.;
15 - 4 sc., 1 inc. to eor = 18 sc.;
16 - 18 sc.;
17 - 5 sc.,1 inc. to eor = 21 sc.;
18 - 21 sc.;
19 - 6 sc., 1 inc. to eor = 24 sc.;
20 - 24 sc.;
21 - 7 sc., 1 inc. to eor = 27 sc.;
22 - 27 sc.;
23 - 8 sc.,1 inc. to eor = 30 sc.;
24 - 30 sc.;
25 - 9 sc., 1 inc. to eor = 33 sc.;
26 - 33 sc.;
27 - 10 sc., 1 inc. to eor = 36 sc.;
28 - 36 sc.;
29 - 11 sc., 1 inc. to eor = 39 sc.;
30 - 39 sc.;
31 - 12 sc., 1 inc. to eor = 42 sc.;
32 - 42 sc.;
33 - 6 sc., 1 inc. to eor = 48 sc.;
34 to 38 (5 rounds) - 48 sc.;
39 - BLO: 48 inc. = 96 sc.;
40 to 47 (8 rounds): 96 sc.
Fasten off.
Once finished, take the galvanized wire, leave it 0.4” longer than the hat, and bend both ends so it doesn't stick out. Insert it inside the hat, bend it to the desired shape, and glue the hat to the head using Craft glue.
Pumpkins (2)
With Amigurumi yarn color #4131 (Dark-Cheddar)
1 - 6 sc. inside of a magic ring;
2 - 6 inc. = 12 sc.
Note: pm. on first sc.;
3 - 1 sc., 1 inc. to eor = 18 sc.;
4 to 6 (3 rounds) - 18 sc.;
7 - 1 sc., 1 dec. to eor = 12 sc.;
8 - 6 dec. = 6 sc.
Fasten off.
To make the pumpkin segments, cut 16” of Amigurumi yarn color #4131 (Dark Cheddar) and, using a tapestry needle, embroider the segments, always entering and exiting through the middle of the pumpkin, forming 8 segments.
After gluing the hat, cut about 12” of Amigurumi yarn color #8990 (Black), fold it in half, wrap it around the hat, tie a knot, and finish with a bow.Glue both pumpkins together.
Designer: Karla Barbosa (@oficialkarlabarbosa)
Pattern: Patty Wolf
Traduction: FuriFuri Amigurumi
Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern.
See more about...
Comments