10/18/2024
Level of difficulty
MATERIALS
1 Amigurumi Soft skein – Color: #8212 (Chrome);
Crochet hook – 2.0 mm and 3.0mm (hair);
Safety eyes (10 mm) – Black;
1 pendant for necklace;
1 chopstick (hashi);
Crepe tape;
tapestry needle;
Thin galvanized wire;Polyester stuffing;Locking stitch marker;
Craft glue.
Stitch Glossary and Abbreviations:
Increase = inc.; Round = rnd. Chain = ch., Decrease = dec.; Half Double Crochet = hdc.; Slip Stitch = sl st.; Single Crochet = sc.; Picot Stitch (3ch., 1 sl st. to attach in the next base stitch) = ps.; End of Row/Round = eor; Place Marker = pm.; BLO = back loops only; FLO = front loops only.
Approximate size: 9.05”
Execution:
Head
With Amigurumi yarn color #3061 (Gardenia) and 2.0mm crochet hook
1 - 6 sc. inside of a magic ring;
2 - 6 inc. = 12 sc.
Note: pm. on first sc.;
3 - 1 sc., 1 inc. = 18 sc.;
4 - 2 sc., 1 inc. = 24 sc.;
5 - 3 sc., 1 inc. = 30 sc.;
6 - 4 sc., 1 inc. = 36 sc.;
7 - 5 sc., 1 inc. = 42 sc.;
8 - 6 sc., 1 inc. = 48 sc.;
9 to 18 (10 rounds): 48 sc.
Place the safety eyes between rounds 14 and 15, with 8 visible stitches between them after they are placed.
19 - 6 sc.,1 dec. to eor = 42 sc.;
20 - 5 sc., 1 dec. to eor = 36 sc.;
21 - 4 sc., 1 dec. to eor = 30 sc.;
22 - 3 sc., 1 dec. to eor = 24 sc.;
23 - 2 sc., 1 dec. to eor = 18 sc.;
24 - 1 sc., 1 dec. to eor = 12 sc.;
25 - BLO: 12 sc.;
26 & 27 - 12 sc.
Stuff it.
Fasten off and hide the yarn inside the head.Embroider the nose with Amigurumi yarn color #3061 (Gardenia) over the 3 central stitches, just below the eyes, between rounds 13 and 14.Embroider the eyelashes and eyeliner with Amigurumi yarn color #8990 (Black), the eyes with Amigurumi yarn color #8001 (White), and the eyeshadow with Amigurumi Sparkle yarn color #3154 (Wine).
Legs (2) and BodyStart with Amigurumi yarn color #8069 (Matrix) and 2.0mm crochet hook1 - 5 sc. inside of a magic ring;
2 - 5 sc. Note: pm. on first sc.;
3 to 7 (5 rounds) - 5 sc.;
8 - 2 sc., 3 inc. = 8 sc.;
9 - 3 sl st., 5 sc. = 8 stitches.;
10 - 3 sl st., 4 inc., 1 sl st. = 12 stitches;
11 - 12 sc.;
12 to 15 (4 rounds): 6 sl st., 6 sc. = 12 stitches;
16 - Go back with 6 sc.; (This is where the heel starts)
Work in back-and-forth rows.
17 & 18 - 6 sc.
Fold in half and close the sides with 3 sc.
Fasten off.
Turn right side out.19 - Make 12 sc., working through all the stitches of the boot. ATTENTION: The first of these 12 sc. should be made right in the center of the boot's heel, meaning on the back of the boot (This is where the boot shaft starts).
20 to 24 (5 rounds) - 12 sc.
Change to Amigurumi Sparkle yarn color #8121 (Snowflake)
25 & 26 (2 rounds) - 12 sc.
Change to Amigurumi yarn color #8990 (Black)
27 & 28 (2 rounds) - 12 sc.
Change to Amigurumi Sparkle yarn color #8121 (Snowflake)
29 & 30 (2 rounds) - 12 sc.
Fasten off the first leg. Make the second leg and don't cut the yarn. In the next round, join the legs.
Change to Amigurumi yarn color #8990 (Black)
Make 3 ch. in the second leg.
31 - Attach with 1 sc. in the first leg, make more 11 sc. in the first leg, 3 sc. in the ch., 12 sc. in the second leg, 3 sc. on the other side of the ch. = 30 sc.
Stuff the legs.
32 - 30 sc.
Change to Amigurumi Sparkle yarn color #8121 (Snowflake)
33 & 34 (2 rounds) - 30 sc.;
Change to Amigurumi yarn color #8069 (Matrix)
35 - 30 sc.;
36 - BLO: 30 sc.;
37 - 4 sc., 1 dec. to eor = 24 sc.;
38 & 39 (2 rounds) - 24 sc.;
40 - 3 sc., 1 dec. = 18 sc.;
41 & 42 (2 rounds) - 18 sc.:
Change to Amigurumi yarn color #3061 (Gardenia)
43 - 18 sc.;
44 - 2 sc., 1 dec. to eor = 12 sc.;
45 - (2 sc., 1 dec.) 3x = 9 sc.;
46 to 52 (7 rounds): 9 sc.;
53 - (1 sc., 1 dec.) 3x = 6 sc.;
Fasten off with a reverse magic ring.
Boot heels (2)
With Amigurumi yarn color #8069 (Matrix) and 2.0mm crochet hook
1 - 4 sc. inside of a magic ring;
2 - 1 sc., 1 inc. to eor = 6 sc.
Fasten off, leaving a yarn tail for sewing.
Sew by hand stitches on the heel (bottom) of the boot.
After finishing the body, you can now attach and articulate the head.Joint: To attach the head to the body, you will use the joint technique. For this, cut a 12” piece of yarn in color #3061 (Gardenia) and, using a doll needle, pass the yarn through the neck between the 47th and 48th rounds, then pass it through the head, exiting at the top. Repeat the same process with the other end of the yarn. Then, tie the ends that come out of the top of the head, making a few knots to secure them firmly. Cut off the remaining yarn. Note: There is no need to hide the yarn, as the hair will cover it.
Doll’s Skirt
With Amigurumi yarn color #8069 (Matrix) and 2.0mm crochet hook
Attach the yarn to the front loop left over from round 39 of the body.1 - FLO: 60 sc.;
2 - 60 sc.;
3 - 1 sc., 1 inc to eor = 90 sc.;
4 - 90 sc.;
5 - FLO: 90 sc.
Fasten off.
Skirt ruffle
With Amigurumi Sparkle yarn color #3154 (Wine) and 2.0mm crochet hook
Attach the yarn to the front loop left over from round 4 of the skirt.
1 - 90 hdc.
Make a round of picot stitch.
Corset lacing embroidery on the dressWith Amigurumi Sparkle yarn #3154 (Wine) and a tapestry needleEmbroider as if threading laces on a sneaker, starting on the 42nd round.
Arms (2)
Start with Amigurumi yarn color #3061 (Gardenia)
1 - 7 sc. inside of a magic ring;
2 - 7 sc. Note: pm. on first sc.
3 to 8 (6 rounds): 7 sc.
Change to Amigurumi yarn color #8069 (Matrix)
9 - BLO: 7 inc. = 14 sc.;
10 & 11 - 14 sc.:
12 - 7 dec. = 7 sc.
Fasten off with a reverse magic ring.
Make the ruffle on the dress sleeve with Amigurumi Sparkle yarn color #3154 (Wine):Attach the yarn to the front loop left from the 8th round of the arm and make picot stitches all around.Sew the arms to the sides of the body, approximately at the height of rounds 47 and 48.
Hair
With Amigurumi Soft yarn color #8212 (Chrome)
1 - 6 sc. inside of a magic ring;
2 - 6 inc. = 12 sc.;
3 - BLO: 1 sc., 1 inc. = 18 sc.;
4 - 2 sc., 1 inc. = 24 sc.;
5 - BLO: 3 sc., 1 inc. = 30 sc.
Fasten off.
"In the front loops left from the 2nd round, repeat 12 times to make the strands: (25 ch., going back with 1 hdc. in each chain loop, then working into just one loop of the chain, attach with 1 sl st. in the next loop of the base).Fasten off.In the front loops left from the 4th round, repeat 24 times to make the strands: (25 ch., going back with 1 hdc. in each chain loop, then working into just one loop of the chain, attach with 1 sl st. in the next loop of the base).Fasten off.Once finished, place the wig on the head and glue it.
Hat
With Amigurumi yarn color #8069 (Matrix) and 2.0mm crochet hook
1 - 6 sc. inside of a magic ring;
2 - 6 sc. Note: pm. on first sc.;
3 - 6 inc. = 12 sc.;
4 - 12 sc.:
5 - 1 sc., 1 inc. to eor = 18 sc.;
6 - 18 sc.;
7 - 2 sc., 1 inc. to eor = 24 sc.;
8 - 24 sc.:
9 - 3 sc., 1 inc. to eor = 30 sc.;
10 - 30 sc.;
11 - 4 sc., 1 inc. to eor = 36 sc.;
12 - 36 sc.:
13 - 5 sc., 1 inc. to eor = 42 sc.;
14 - 42 sc.:
15 - 6 sc., 1 inc. to eor = 48 sc.;
16 to 20 - 48 sc.;
21 - 1 sc., 1 inc. = 72 sc.;
22 - 72 sc.;
23 - 1 sc., 1 inc. to eor = 108 sc.;
24 to 30 (7 rounds) - 108 sc.
Fasten off.
Glue the hat to the head using Craft glue.
Spider
With Amigurumi yarn color #8990 (Black) and 2.0mm crochet hook
1 - 6 sc. inside of a magic ring;
2 - 1 sc., 1 inc. to eor = 9 sc.
Note: pm. on first sc.;
3 - 9 sc.;
4 - 1 sc., 1 dec. to eor = 6 sc.;
5 - 6 inc. = 12 pb.:
6 - 3 inc., 9 sc. = 15 sc.;
7 - 15 sc.;
8 - (1 sc., 1 inc.) 3x, 9 sc. = 18 sc.;
9 & 10 - 18 sc.;
11 - 1 sc., 1 dec. to eor = 12 pb.
Stuff it.
12 - 6 dec. = 6 sc.
Fasten off with a reverse magic ring.
To make the spider legs, use thin galvanized wire. Cut 4 pieces of wire, each approximately 4”.Pass them through the spider's body, leaving half on each side, so you will have 8 legs.Check if the leg size is proportional; if not, trim the ends.Apply Craft glue to the legs and wrap Amigurumi yarn color #8990 (Black) around them, covering all the legs.Finally, bend the legs.
To finish the doll, with Amigurumi yarn color #8990 (Black), wrap it twice around the hat and tie a knot, leaving a long piece of yarn hanging down.Glue the spider on top of the hat.
To make the necklace, cut approximately 4” of Amigurumi yarn color #8990 (Black), add a pendant of your choice, wrap it twice around the neck, and tie it, finishing with a bow.
Designer: Karla Barbosa (@oficialkarlabarbosa)
Pattern: Patty Wolf
Traduction: FuriFuri Amigurumi
Disclaimer: Measurements are approximate due to differences between centimeters and inches, needle sizes and tension. All care has been taken to allow accurate completion of the pattern.
See more about...
Comments